What type of hose is API 16 D? API 16 D type hose (that is, rubber hose) is relatively common in the oil industry. It is widely used in the oil field. It is not only used to seal the inside of the oil, but also as The connection part of the vehicle power unit.

API 16 D can make hoses completely replace rubber, which is a good thing for the oil industry. Oil needs to be sealed, but traditional rubber seals cannot meet this demand, so many rubber seal products with different properties and uses have appeared on the market. In addition to petroleum applications, there are many other applications where the corresponding model or shape can be used. API 16 D is widely used in the petroleum industry, such as: used to seal the coolant, fuel, etc. in the car; used to control water for the air-conditioning system in the car, water for the air-conditioning water pump and compressor; protect high-voltage lines in the car, etc. API 16 D type hose (rubber hose) has the following characteristics: 1. Good corrosion resistance; 2. Small pressure loss; 3. Can work for a long time.

Power the well control device BOP well control hose to ensure safe operation

In oil and natural gas drilling, workover and completion operations, it is necessary to install a set of equipment – drilling well control device at the wellhead to avoid blowout accidents. When the pressure in the wellbore is lower than the formation pressure, a large amount of formation fluids such as oil, gas and water will pour into the wellbore, forming overflow or well kick. In severe cases, blowouts and fires.

Drilling well control device is mainly composed of blowout preventer, cross, remote console, choke well blowout manifold and so on. Among them, the hydraulic pipeline that provides power transmission for the blowout preventer plays an important role in the safety of drilling operations. In field operations, hydraulic pipelines must not only withstand the high pressure of blowout or reverse circulation operations, but also maintain power transmission under the extreme conditions of blowout fires to ensure that the blowout preventer can close the wellhead in time.
Litong BOP well control hose escorts drilling safety
Litong regards quality as the life of the enterprise, and the responsibility of users as its own responsibility. BOP well control hose has successively passed the quality management system certification APIQ1 and the Lloyd’s fire resistance witness test, providing safety guarantee for on-site operations.
Litong BOP is based on the manufacturing process of the four-layer winding high-pressure hydraulic hose. The well control hose uses fire-resistant rubber as the raw material for the outer rubber layer of the hose, and the outer surface of the hose is covered with stainless steel armor to achieve the effect of fire prevention and fire prevention. In the extreme case of open flame combustion through pressure and 704°C, the fire resistance time of Litong BOP well control hose is relatively long according to API standards.
The hose adopts ultra-high-strength steel wire as the reinforcement layer, which not only improves the compression resistance of the pipe body, but also makes the pipe body lighter, which is more conducive to on-site operation, and provides another layer of protection for engineering safety.
In addition, according to the requirements of the nominal diameter of the blowout preventer, Litong BOP well control hose also has the characteristics of equal diameter (full flow). Its effective diameter is twice that of the industry standard, and the flow rate is larger, which can effectively shorten the opening and closing time of the blowout preventer and ensure the safety of personnel and engineering.
LT303API16D Series-BOP Well Control Hose
Application range: Remotely control the opening and closing of the blowout preventer in the well control system, and the hydraulic oil is transported under high pressure
Hose structure:
Inner layer: NBR
Inner Tube Type: Full Flow
Reinforcement layer: 4 layers of high-strength super-soft steel wire
Outer protective layer: stainless steel armor
Temperature range: -45°C~+100°C (-49°F~+212°F)
Executive standard: APISpec.16D|Lloyds
Fire resistance complies with APISpec.16D, 704℃x5min